Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
by Togusha, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Parts to mount bowden improved with 10mm fittings Prusa 3d printer and using budaschnozzle.
where is the internal diameter of the thread is 9mm, carefully turning the fitting can make the internal thread, if you can apply heat to the fitting is made much easier. It consists of two parts, one to be placed on the budaschnozzle and another to place the extruder at the top next to the Z-axis motor.
bowden budaschnozzle by Togusha is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Togusha a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Togusha would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).