IPAD Mini Stand - vertical or horizontal
4
Likes
324
Downloads
571
Views
Published on February 16, 2013
Description
This is a stand for the IPAD mini. The IPAD mini can be placed in the stand either horizontally or vertically.
The .stl files with "_w_cover" have wider hooks to hold the ipod mini with its cover attached.
The .stl files with "_w_cover" have wider hooks to hold the ipod mini with its cover attached.
Instructions
2 cross pieces are required
======================
either print two mini_stand_130201d_leg.stl
or print one mini_stand_w_cover_130216_cross.stl which prints two cross pieces
2 legs are required:
================
without a cover:
-------------------
print two mini_stand_130201d_leg.stl leg pieces
with a cover:
----------------
print one mini_stand_w_cover_130216_leg.stl which includes two legs in one print
assembly:
========
- glue the cross piece to hook side of the leg
- align other leg carefully and glue to the cross piece
- glue in the back cross piece between both legs
======================
either print two mini_stand_130201d_leg.stl
or print one mini_stand_w_cover_130216_cross.stl which prints two cross pieces
2 legs are required:
================
without a cover:
-------------------
print two mini_stand_130201d_leg.stl leg pieces
with a cover:
----------------
print one mini_stand_w_cover_130216_leg.stl which includes two legs in one print
assembly:
========
- glue the cross piece to hook side of the leg
- align other leg carefully and glue to the cross piece
- glue in the back cross piece between both legs
License
IPAD Mini Stand - vertical or horizontal by tc_fea is licensed under the Attribution - Creative Commons license.
You must be logged in to post a comment.