drainers for bottles (bottle -> cup & bottle -> bottle)
by MLworx, published
Ever tried to completely drain a bottle with a low viscous fluid (e.g. silicone -> expensive!)?
print it - srew it on - put it on a cup or another bottle and let it drain
outer diameter of bottle thread: 26.65mm
inner thread diameter: 24,4mm
thread pitch: 4mm
thread length: 13mm (25mm for bottle-bottle)
groove for cup (bottle to cup version):
If you're asking yourself why I designed 2 parts instead of one which fullfils both jobs: if I would have made the thread of the bottle->cup 25mm you would have drops of your liquid in the thread when draining in a cup... ;-)
Take care if you have a 2 compound Silicone / fluid as I have: NEVER mix the drainers as your liquid my starting to cure.
...print 2 and mark them properly....
Liked ByView All
Give a Shout Out
drainers for bottles (bottle -> cup & bottle -> bottle) by MLworx is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure MLworx would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).