Universal Adjustable Phone and Small Tablet Stand
by bobamason, published
The stand holds most larger phones and small tablets.
It is adjustable from about 50 degrees to 90 degrees
Print all 3 of the STL files and remove the raft.
The small spacers may need to be cleaned up with a file or sandpaper so that the joints move easily.
Assemble the stand using four(4) 4x1/2 phillips metal screws:
-insert the spacers into the holes on the side parts that hold the phone
-attach the base and the stop that adjusts the angle to the sides using the screws through the spacers
Liked ByView All
Give a Shout Out
Universal Adjustable Phone and Small Tablet Stand by bobamason is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure bobamason would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).