1/32 DIN Temperature Controller Wall Mount
by qskapunk, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This simply provides a way to mount a 1/32 DIN Temperature Controller to the wall.
I use a Fuji PXR3 Temperature controller to control the temperature of Homebrew beer.
This will work with anything that is 1/32 DIN (22,5mm x 45mm)
1 - Print it
2 - Add a couple layers of masking tape underneath the mount to ensure a snug fit
3 - Mount to wall (carefully, if you tighten too much the plastic will split)
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
1/32 DIN Temperature Controller Wall Mount by qskapunk is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving qskapunk a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure qskapunk would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).