1/16 DIN Temperature Controller Wall Mount
by qskapunk, published
This simply provides a way to mount a 1/16 DIN Temperature Controller to the wall.
I use a Panasonic FP-e PLC to control the exposure time of my exposure box. This will work with anything that is 1/16 DIN (45mm x 45mm)
Liked Byview all
Give a Shout Out
1 - Print it 2 - Add a couple layers of masking tape underneath the mount to ensure a snug fit 3 - Mount to wall (carefully, if you tighten too much the plastic will split)