Customizable Cupcake Pick Maker by Fused3D
by Fused3D, published
Brought to you buy www.fused3d.com 3D Printer Supplies.
A Highly Customizable Cupcake Pick Maker for your 3D Printer.
Make Customized Cupcake Picks for your next party. Other uses for this are welcome :)
Liked Byview all
Give a Shout Out
There are 3 Layers of Graphics and/or Text plus 1 Pick Layer that is put on the lowest layer and on the platform.
With the Replicator 2 you can pause a build when it starts printing on the next layer and then you can change colors and get multicolored prints.
When You set a Layer to be Text, the proceeding layers will not work, so make your first layer or two a Graphic, then use Text as one of the last Layer Styles if you want a billboard style pick.
If you do your first layer as Text, you can use values that will keep all the text together and set the "Line 1 Put Line Through Text Thickness Scale" to Zero to get rid of the support rectangles.
Or you can use a larger value (Thicker rather than thinner, depending on how small your pick will be)
You have an option to make everyother character in a line of text slightly thicker than the other characters to make it pop more.
If you have improvements to my code, or want a feature, or have suggest designs to add please message me and I'll try and add them when I can.
I printed the multi layered pick using 200micron profile and 100% fill and 1 shell, you probably can get by with much less fill. Also the multi layered shamrock pick is about 4 inches high, and the 200 micron profile worked perfectly. Anything smaller I would suggest a 100 micron (.1mm) Resolution, especially if it has Text.
Supports should not be needed, unless you don't customize the Cupcake Pick Correctly.
Thanks Again, Please visit www.fused3d.com for 3D Printing Supplies including 6inch wide x 60 yard ScotchBlue Painters Tape, and 12x7.25 Inch Painters Tape Sheets, plus Wood Filament and adding stuff all the time.