thread gauge card
by abutai, published
handy thread gauge card to help you sort your bolts and screws mess...
the file uploaded is designed for DIN934 metric nuts sizes M10, M8 ,M6, M5, M4, M3, M2.5.
The Hex cavities are designed with about 2% press-fit in relation to the nut measured dimensions
print at best quality.
heat each nut (I used a few seconds with a heat gun) and press into the cavity (use protective gloves).
start sorting your bolts and screws....
Liked ByView All
Give a Shout Out
thread gauge card by abutai is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure abutai would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).