by lothar22, published
Various styles of terminal blocks for breadboards and robotics.
All can be printed without support.
I used 20% in-fill and 3 perimeters.
Standard size terminal blocks, in different styles/sizes. print, insert nuts, snap in metal connectors if desired, screw in a bolt or screw of your choice, wire something!
SDandButton_TB - Provides 36 terminals if all four corners are printed. SD card space, and a button holder (for reset, or whatever), for a Radio Shack Breadboard plate. Standoff columns for stacking or for a cover, mounting tabs with holes for mounting terminal block on something.
BB_mini_TB - Provides 16 terminals if all four corners are printed. Lower profile standoff columns.
onPRUSA_TB - Provides 10 terminals, mounts on an 8mm threaded rod.
mini_TB - Provides 3 terminals for on-project installation.
Liked ByView All
Give a Shout Out
Terminal Blocks by lothar22 is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure lothar22 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).