Downloads
They Like It
Nutcracker by psync is licensed under the Attribution - Non-Commercial - Creative Commons license.
© 2010 by psync
Instructions
Things needed:
2 x M5 bolts (I used the ones from my old extruder)
2 x short M3 bolts
2 x Bottle Caps
Hot Glue Gun
Dremel or sandpaper (optional)
1) Print out all the parts. If you have other colours go crazy!
2) Slide the left and right body pieces into the core through the top holes, you might have to sand the top stubs on the core a little to get a fit if your part extruded too much
3) Insert the jaw piece into the middle of the core and secure it on both sides with the M5 bolts. The bolts should end up flush with the body, and your jaw should be able to move easily
4) Glue one bottle cap each into the round circles on the lower head piece and the jaw
5) Glue the top head piece to the bottom piece
6) Decorate with a silly expression (I used a sharpie)!
7) (Optional) Place on cooled build platform in Makerbot and put mouth in open position (you might want to use a binder clip to hold it in place). Position crushable in mouth, move Z-axis, fire up repG and hit -ve on the Z axis!
