Printer Risers for MendelMax
by dcgtek, published
Legs to raise your printer up 3cm. These attach diagonally across each corner beneath the printer. They will attach to a 20mm extrusion using T-nuts.
Print 4 of these and attach on each corner. Attach rubber feet for extra grip on the bottom.
Download the scad file and you can adjust the height and switch between the solid and cutout versions.
Printed full speed with 30% infill and 0.3mm layer height.
Liked ByView All
Give a Shout Out
Printer Risers for MendelMax by dcgtek is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving dcgtek a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure dcgtek would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).