Tapered Square pot 90mm tall V1
3
Likes
65
Downloads
334
Views
Published on February 19, 2013
Description
This is a full sized square pot. It is about 90mm tall, and 75mm square at the widest. ABS has poor UV resistance. PLA has excellent UV rersistance.
Instructions
I apologize: This design could be improved but I deleted the original file and I find it difficult to create pots like this in sketchup. I will work on other versions in the future.
Use .3 layer height...what it was designed for. .7mm extrusion width will get you the proper wall thickness of 2.
Problems: base is too thick. Should be 3 layers not 6. Top rim is too thick. Drainage holes area uses some gap fill style printing, which should not be. Otherwise it's a functional pot.
Use .3 layer height...what it was designed for. .7mm extrusion width will get you the proper wall thickness of 2.
Problems: base is too thick. Should be 3 layers not 6. Top rim is too thick. Drainage holes area uses some gap fill style printing, which should not be. Otherwise it's a functional pot.
License
Tapered Square pot 90mm tall V1 by SDCPs is licensed under the Attribution - Share Alike - Creative Commons license.
More from SDCPs
More from Outdoor & Garden
You must be logged in to post a comment.