Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!

printrbot plus w RAMPS1.4

by sakunamary, published

printrbot plus w RAMPS1.4 by sakunamary Feb 20, 2013


printrbot plus w RAMPS 1.4

Recent Comments

view all
??????ramps ??????????LCD????

More from 3D Printer Parts

view more

Liked By

view all

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag


  I am in China , it is easy for me to get a arduino mega 2560 (1 piece 73RMB , 15USD) and DIY 10 sets of RAMPS 1.4 just cost me 47 USD(about 300 RMB ) ,printrboard is not sold in China ,at the same time i would like to DIY a PrintrBot Plus , so i do some mod job let RAMPS 1.4 work on PrintrBot Plus .  
 dxf file is base on http://www.thingiverse.com/thing:31265 ,and thanks for abdrumm!

Feb/20/2013 : add a new dxf file which only contains the top board and outside board of the base ,also debug some bugs,the old version which i delivered have an error ,now fix it . So pls re-downlaod the new version !!!

 Instruction in Chinese :
  我在中国,我这里可以很容易就搞到arduino mega 2560 (1块73元,大概15美元不到),我自己做了10块RAMPS 1.4的扩展版,这个总共花了我大概47美元(差不多300元不到,包了打板,买元件。焊接是我自己用热风机搞得回流焊)。国内好像买不到printboard (* 宝上没有卖的)。我想自己做一台printrbot plus ,所以我在原有的设计中做了一些修改工作,使RAMPS可以用在printrbot plus上面。
 原设计图是 http://www.thingiverse.com/thing:31265,感谢abdrumm的工作,感谢所有TV。
??????ramps ??????????LCD????
哈哈 太高兴了,看到了我们国人分享的3D打印机,希望您能继续加油做出更多更好的作品
我只是在其它人的基础上做一些修改工作而已,接下来的一些工作就是desgined in China 了。
Hi, I was wondering how your progress on this was going,
Also, what firmware are you using, and could you post up your settings?

I use marlin V1 as my default firmware ,and I am printing the parts extruder for my new printrbot , but i am trying to put the Ultimaker 's extruder on printrbot !Because the bolt is no cheap in here (cost me $10,and MK5 bolt just cost $3 ) and I use the 20t MXL gear for x and y axis .so the printer is building now .