Gigaware Webcam Mount
by banthafodder7400, published
This is a model inspired by thing:8269 for a webcam mount. My webcam is completely different, and my machine is not makerbot. I have a Gigaware Webcam.
Print as many sections as you feel fit. Each leg is about 1.25" blot center to bolt center. I used M3 x 16mm bolts, washers, and nuts to assemble. There is one clip piece with an opening of 5mm which I used to clip to my acrylic plate ontop of my unit. You can see in the picture what I mean. I had to lightly sand the nub that the camera mounts to. This is good for making sure it is a really tight fit.
This can be useful for other applications as well. Just take the chain part for instance and then design your own bracket for something to mount.
Check out other updates and thingsandtrains.blogspot.com
Liked ByView All
Give a Shout Out
Gigaware Webcam Mount by banthafodder7400 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure banthafodder7400 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).