by Slynch, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Very simple name plate made with flimsy little stands for my recently promoted mother. The plate is 8 by 2 inches and the stands are 2.35 by 0.575.
Using an Epilog laser, vector/raster cut a piece of acrylic (recommend using black) that is at least 8.5 by 4 inches. Vector settings should be set to; Speed:12, Power:100, Freq:5000. For the Rastering settings; Speed:100, Power:70.
Name Plate by Slynch is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Slynch a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Slynch would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).