Coat hook, customizable
by Soren_Furbo, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Depending on the parameters, a coat hanger, a hat hanger or even a doorknob.
It could do with more elegant screw holes, but I am not going to work on it any more.
Inspired by the Dots coat hook by Muuto (http://www.muuto.com/collection/The_Dots_coat_hooks/Dots coat hooks).
The files "coathook.stl", "coat hanger.stl" and "hanger.stl" are with two screw holes. The files "hathook.stl" and "maskhook.stl" are without screwholes.
Edit the coat hook in Customizer OR:
Download the "Coat hook.scad" file and open it in your favorite text editor.
If you are going to use screws to attach your coat hook to the wall, screw one or two screws inot the wall. If you want a flat back in stead, set "screw_hole_size=0;" in the .scad file
If you have used two screws, meassure the distance between the screws, from the left side of one screws head to the left side of the other screw head, in mm. Set this number as "screw_distance". If you only want one screw, set this number to 0.
Meassure the diameter of the screw heads, in mm, and set this number as "screw_hole_size".
Select the other parameters. Check that the screw holdes are placed nicely in the back plate. Compile to .stl
Print with 2 extra shells. I use 5% fill.
- Hang up your new coat hook. If it falls down later, put a little ball of Blu-Tack in each screw hole before putting the coat hook back up.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Coat hook, customizable by Soren_Furbo is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Soren_Furbo a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Soren_Furbo would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).