by BonsaiBrain, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a little Dragon model which we scanned and printed in a test on how fast we could go from real object to printed object with our automated scanner and a mendel.
The full time needed was 5 hours from real object to copy.
The object is around 6x4x4cm and was printed in white PLA with a layer height of 0.2mm.
You can find more about this at www.ifeelbeta.de
Print, have fun.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Scanned Dragon by BonsaiBrain is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving BonsaiBrain a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure BonsaiBrain would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).