Zen ToolWorks Filament Wheel Extension, Part B
by designrama, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This extension is designed specifically for 1.75 mm ABS filament sold by Zen ToolWorks on Amazon. It keeps filament from falling off the cardboard wheel.
This piece is 195 mm in dia., it will take up almost every mm on the X axis of M2 bed. I printed it with a two loops skirt, set at 1 mm distance.
It's friction fit, just push it into the center hub. Use a flat head screwdriver to pry it loose for removal.
Before printing this piece, double check center hub dimension with the seller.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Zen ToolWorks Filament Wheel Extension, Part B by designrama is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving designrama a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure designrama would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).