by richard_j_m, published
This is possibly the most glamorous thing I've made on my printer so far. A replacement loo flush handle as I couldn't find one in the shops.
Print - Poo - Flush
Mine was .25 layers with a .35 nozzle fairly slow printing around 60mm/s using PLA @ 175C with no cooling. It's really sturdy for those time when you have to flush again and again.
Liked ByView All
Give a Shout Out
Loo Flush by richard_j_m is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving richard_j_m a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure richard_j_m would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).