Porsche Carrera GT repaired
by 3DPort_UA, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I take Domonoky's Porsche Carrera and made it symmetrically. In his model, the wheel arches have been different widths.
Also made some other changes, such as holes for the axles are reduced and shifted the maximum down. So, now the wheels do not rub on the arch, and my son is now rolls the car with the rest of its fleet of vehicles :)
I tried several times to print this model with a layer of 0.1 mm. Started getting amazing, but then every once in the middle of printing something happened - the model was coming off from bed, then the shift of the layers happen. Can someone get? I will also continue to try.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Porsche Carrera GT repaired by 3DPort_UA is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving 3DPort_UA a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure 3DPort_UA would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).