by variador, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Yet another . . . This is the piece that replaces the one in the car I used for the Iphone 4. It is light but sturdy enough.
Print and fit the lightning adapter in place. It is a tight fit but depending on your print use tape or file so the adapter stays in place while you move the phone in and out.
There is a hole for the headphone jack. Unfortunately it is only a hole since the plastic around the jacks come in different sizes.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Iphone5 holder by variador is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving variador a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure variador would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).