by tommylin, published
original design this role, it's Replicator 2x Mascot figure, have 6 DOF, easy printing out and assembly.
Recent Commentsview all
The MB_head.stl file isn't manifold, this caused a problem when I sliced it in Makerware using the Makerbot Slicer. It caused the whole head to be filled in with infill.
You can either repair the file using netfabb or slice it using skeinforge
Kallipigous you are right, missing MB Joint 0.stl and MB Joint 1.stl upload it already, Thanks Kallipigous , enjoy and have fun.
Liked Byview all
Give a Shout Out
the head is Replicator 2x,
Skirt like filament spool,
easy assembly, fun for play,
6 DOF can play a lot Posture,
more photo you can visit my flickr
Replicator 2, ReplicatorG Ver 0040
Slicing: Replicator 2 slicing defaults
layer Height 0.1mm,
Travel Feedrate 150,
if you like my design,
and download STL files printing your own, Please ~
press "Like this thing" the Heart icon in upper right this page, Thanks~
any suggestions would be appreciated.
//=== assembly Instruction ====
A.MB_Skirt-C between MB_Skirt-A and MB_Skirt-B.
B. all joint just cut the 1.75mm filament through hole.
You must be logged in to post a comment.