Batman Cowl 3D Printable
by 3D_Al, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
An awesome Batman cowl that fits and is great for Halloween and cosplay. Thanks to MIPRESIDENTE for putting up the Batman Cowl on Thingiverse in order for this to become real, I thank you. With all the parts put together WITHOUT the adapter; the mask is 175.8 mm by 242.62 mm by 310.74 mm (x,y,z). I changed the scale to 0.98 in order to print it on my 3D printer, which is the same one in the photos.
I took the Batman Cowl from MIPRESIDENTE and put into blender and cut it into 6 segments in order to print on my Delta printer and made two adapters to make the mask fit two my head. Change the scale to fit your 3D printer's capabilities and make sure to scale it to your head's dimensions, enjoy. Extrude the Adapter to help fit your head with the front and back segments of the mask. I glued elastic bands on the inside of the mask to connect the front parts and back parts together. I print the mask at a scale from 1 to 0.98 for the x,y,z on Cura for each piece in order to fit it on the bed of my Delta 3D Printer. You may change the adapter size to give the additional length required to fit your head.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Batman Cowl 3D Printable by 3D_Al is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving 3D_Al a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure 3D_Al would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).