Switcher holder
2
Likes
108
Downloads
529
Views
Published on February 28, 2013
Description
This is a holder for a couple of switchers to install in any bar of the Prusa. It was design in SketchUp, I added the source file so you can customize it. The default holes are 6 and 12 mm for the small and big switchers. and M3 holes for the screws (optional).
Un soporte para colocar un par de interruptores en cualquier barra de la Prusa. Fue diseñado en SketchUp, he añadido los archivos originales para que puedan modificarlos a su gusto. Los agujeros por defecto son de 6 y 12 mm para los interruptores y dos agujeros para tornillos M3 (opcionales).
d0ke.wordpress.com
Un soporte para colocar un par de interruptores en cualquier barra de la Prusa. Fue diseñado en SketchUp, he añadido los archivos originales para que puedan modificarlos a su gusto. Los agujeros por defecto son de 6 y 12 mm para los interruptores y dos agujeros para tornillos M3 (opcionales).
d0ke.wordpress.com
Instructions
1- Download the stl file for direct printing or the source file to customize it.
2- Customize it if needed
3- Print it, I use ABS but it could be also printed in PLA
4- Visit our blog for more cool things: d0ke.wordpress.com
The object fits very tight in the bars, screws are not needed but you can use a couple of M3 screws to secure it.
2- Customize it if needed
3- Print it, I use ABS but it could be also printed in PLA
4- Visit our blog for more cool things: d0ke.wordpress.com
The object fits very tight in the bars, screws are not needed but you can use a couple of M3 screws to secure it.
License
Switcher holder by DokeRobots is licensed under the Attribution - Share Alike - Creative Commons license.
More from DokeRobots
More from 3D Printer Accessories
You must be logged in to post a comment.