Open Printer Enclosure
by dowhilegeek, published
For a while I had wanted an enclosure to keep the heat around the printer to stay there in its own little biome. The problem is there arnt many fully enclosed things like that out there, so I made my own. It was designed to fit Prusa i1-i2, but the design is easily modified for other sizes.
This thing is still in heavy beta and I will be updating it to perfection as I go through iterations of cutting.
Open Enclosure (insert version number here).stl is to be lasercut. The material must be about 6mm thick. I'd suggest separating the doors from the rest of the design if you want to lasercut the frame in wood and the doors in acrylic, I'll probably get around to doing that eventually.
Liked ByView All
Give a Shout Out
Open Printer Enclosure by dowhilegeek is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
We're sure dowhilegeek would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).