Camera
10
Likes
1831
Downloads
565
Views
Published on May 4, 2009
This thing was Featured on May 4, 2009
Derived from
*Updated* Medium Format Camera
by langfordw
Description
This is an updated version of my previous medium format camera. I wanted to make a simple one that I was sure was going to print. The smaller size also means it'll be in better focus when used with a Holga lens and shutter assembly.
You can either just attach your own pinhole to the front or you can print out the holga attachment and mount a Holga lens and shutter assembly right on the front giving you a fully functional camera with a proper shutter.
The size of the images is going to be a little funky (3.6cm wide and 6cm tall) but it works.
You can either just attach your own pinhole to the front or you can print out the holga attachment and mount a Holga lens and shutter assembly right on the front giving you a fully functional camera with a proper shutter.
The size of the images is going to be a little funky (3.6cm wide and 6cm tall) but it works.
Instructions
Print out one of each part (all the parts are already rotated for the best print-ability). Put the winder through the hole in the top and glue on the winder grip. The top should just fit snugly on the base and I'm thinking that it can just be secured with a bit of tape.
Then go take some pics :)
Then go take some pics :)
You must be logged in to post a comment.
License
More from langfordw
Hi:
I'm totally new to desktop fabrication. My hobby is tiny cameras: Watch cams, ring cameras, etc. What film size does your camera use, and what is the image area?
Best regards,
Al