by flo, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A new design without threads
Add a 16mm glass marble between the two parts, assemble with 6 M3 screws and nuts. You may also add a spring if you cannot install the check valve in such way that the gravity push the marble in its location.
You may also add a paper or rubber joint between the parts to avoid leaks. This joint can be cut in a bicycle inner tube for example.
It is designed for 21 mm inner diameter of household dishwasher or clothe-washer water outlet.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
check valve by flo is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving flo a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure flo would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).