e-revo 1/16 ESC holder
by trazor, published
If your e-revo 1/16 RC car has fried the ESC, you will need to buy another. Most aftermarket ESC do not fit in the original sloped position. Print this part for a fix.
Print the part. Put some drops of cianocrilate on the upper side and stick a square of double sided tape. Then, peel the covered side of the tape and stick your ESC.
Liked ByView All
Give a Shout Out
e-revo 1/16 ESC holder by trazor is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving trazor a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure trazor would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).