Loading

Calibration Cube Collection

by thingster, published

Calibration Cube Collection by thingster Mar 3, 2013

Thing Info

17515Views 10148Downloads Found in 3D Printing Tests
Report Thing

Summary

I've put some print test cubes each of a different size into a nice collection. It contains 10 different sizes (edge length) reaching from 5 to 50 mm with increments of 5 mm.

List:

5 mm
10 mm
15 mm
20 mm
25 mm
30 mm
35 mm
40 mm
45 mm
50 mm

Instructions

Use these for printing tests. I recommend thicker walls for the larger boxes.

More from 3D Printing Tests

view more

Thing Info

17515Views 10148Downloads Found in 3D Printing Tests
Report Thing

Makes

Liked By

View All

Tags

License

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

I printed the 5 and 10mm cubes. The 5mm cube printed fine but I had to adjust settings for my printrbot because it could not cool fast enough and had problems with warping due to shrinkage at the top and not filling the top. First I adjusted to 50% fill which worked. I also tried lowering the fill back down to 15% and slowed the print speed to 15mm/sec from 45mm/sec. While this also solved the shrinkage warping, it did not work out as well for the top fill.

Verry usefull to test printers, thank you.

Top