Power Supply Mount for MendelMax
by hightechdan, published
Simple, blocky hardware for your 24 V power supply. Secures the PSU vertically to the side of the frame with short M3 screws and no t-slot nuts.
3 M3x10mm screws
Print one copy of psu_top and two copies of psu_bottom. Drill out the support layer in the screw holes.
Place the bottom mounts between the two extrusions of the frame base and secure to the PSU with M3x10mm screws.
Insert the hook of the upper mount into the inside slot of the diagonal extrusion above the lower mounts. Fasten it to the PSU with an M3x10mm screw.
Liked ByView All
Give a Shout Out
Power Supply Mount for MendelMax by hightechdan is licensed under the Creative Commons - Public Domain Dedication license.
What does this mean?
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure hightechdan would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).