UP Mini heat platform holder
by everyplacer, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Self adjustable UP Mini heat platform holder. I found in my Mini that the center of printing bed are higher than at the corners. To prevent that bending I print this thing, which gives ability to flatten surface of the printing bed.
Before you print it, check yours UP Mini building platform for this bending in the center issue. If the center is higher than the corners, just print this thing and put it instead stiff old one. Also check the lengh of screws, I had to shorten mines because they not alowed to move the bed way down. I've tryed few shapes, but this one work better.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
UP Mini heat platform holder by everyplacer is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving everyplacer a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure everyplacer would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).