20x4 LCD desk mount for Printrbot 1405 or any 3D printer
by garMo, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a desk mount for a 20x4 generic lcd screen with seperate encoder used on a Printrbot maker's kit (1405)
The Knob is http://www.thingiverse.com/thing:517242
Printed in PLA with 20% infill
The mount is my design, however i forgot to include cable relief, so i included a simple one to be printed seperately and glued wherever is required.
Printbot std firmware.
Uses generic I2C screen, but wired up to use full serial input from Printrbot revF4 board as generic frimware does not support I2C.
Seperate rotary encoder.
Diagram for wiring the lcd is for std screen, but with I2C screen adapter fitted pins 3.15 and 16 for contrast, backlight and gnd are already taken care of. Don't forget to connect pin5 to gnd though.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
20x4 LCD desk mount for Printrbot 1405 or any 3D printer by garMo is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving garMo a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure garMo would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).