Samsung Galaxy Blaze 4g phone stand
by phaseshift, published
This is a stand for the Samsung Galaxy Blaze 4g I made that accommodates the stock USB cord into the stand. Still in the test fitting stage so if you print it before me please let me know how the tolerances are on the sides for the phone.
Print with at least %20 or so infill to get some weight on it. Insert the cord in the slot and slide the end of the cord into place. Glue in place with some superglue or solder some plastic. Do what you wish with the letters :)
Liked ByView All
Give a Shout Out
Samsung Galaxy Blaze 4g phone stand by phaseshift is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure phaseshift would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).