Loading

Makergear M2 cooling fan offset bracket.

by tomlombardi, published

Makergear M2 cooling fan offset bracket. by tomlombardi Mar 5, 2013

Description

The fan on my Makergear M2 would tap the frame slightly when homing the X axis. This is easily fixed by rotating the fan slightly, but would mess up my feng shui ;-). I needed to keep the fan square and move it over a few millimeters. This bracket offsets the cooling fan.

***update, I've moved the hole up 3mm to help the fan clear the clips on the build platform.***

Recent Comments

view all
nice tip, I also have to rotate the fan a littel bit becasue is was touching the frame...
Moving it up a bit to clear the fan clips makes this extra compelling. that was bugging me on my M2 as well. :)

More from 3D Printer Accessories

view more

Makes

Liked By

view all
Make Tomorrow...

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

I printed this thing in PLA using .25mm layers at 20% infill (standard settings) on an M2. I ran the STL through Netfab so it is clean and ready to slice. Just replace the original cooling fan bracket with this offset bracket.
nice tip, I also have to rotate the fan a littel bit becasue is was touching the frame...
Moving it up a bit to clear the fan clips makes this extra compelling. that was bugging me on my M2 as well. :)
Top