B624zz holder for Prusa i3 Belt (x and y axes)
12
Likes
464
Downloads
1042
Views
Published on March 5, 2013
Description
This part allows to use a B624zz bearing instead of the B623zz (chosed by Josef Prusa).
With this part you will get the same external diameter than with the original Prusa i3 part, so everything will be aligned as in the original i3 design
With this part you will get the same external diameter than with the original Prusa i3 part, so everything will be aligned as in the original i3 design
Instructions
This thing is designed using OOML ( iearobotics.com/oomlwiki ). If you want to print it just download and print the STL.
If you want to modify it install the OOML (instructions on the wiki) and compile using cmake or your favorite build tool
Source code of this and other things can be found in github.com/avalero/3dthings
If you want to modify it install the OOML (instructions on the wiki) and compile using cmake or your favorite build tool
Source code of this and other things can be found in github.com/avalero/3dthings
You must be logged in to post a comment.
License
B624zz holder for Prusa i3 Belt (x and y axes) by avalero is licensed under the Attribution - Creative Commons license.
More from avalero
More from 3D Printer Accessories
Pretty tight! I printed these in PLA and had to bore out the middle a bit. Before printing I recommend folks set their slicer scaling to 105-110%.
mmm, really? mine fitted perfectly :S I will reprint it to be sure! thanks!