Tantillus Corner Pieces for 5.5mm Acrylic w/ Set Screws
by goopyplastic, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I had my acrylic pieces cut from chemplast gp which measures to 5.45-5.55 which has a bit of slop when used with the normal corners. These corners are narrowed to have a 5.6mm channel. I also added set screw mounts for 2.5mm screws that you can use if you idler rods slop back and forth.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Tantillus Corner Pieces for 5.5mm Acrylic w/ Set Screws by goopyplastic is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving goopyplastic a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure goopyplastic would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).