Bike Handlebar Mount Clamp Narrow Version
Description
I took the original version and made it much narrower, it is about 12mm wide. I think the original is around 30mm wide.
I then made a custom holder for my Sony MP3 player and used this mount to attach the MP3 player holder to my bike.
I used Tinkercad to make the modifications
I then made a custom holder for my Sony MP3 player and used this mount to attach the MP3 player holder to my bike.
I used Tinkercad to make the modifications
Instructions
I made it to use size 6-32 screws and nuts. I used a 2" screw and
cut off about 1/4" or so with a Dremel. For the hinge, I cut a metal curtain
hook with a pair of wire cutters and pressed it into the hole with a pair
of pliers.
cut off about 1/4" or so with a Dremel. For the hinge, I cut a metal curtain
hook with a pair of wire cutters and pressed it into the hole with a pair
of pliers.
License
Bike Handlebar Mount Clamp Narrow Version by mb20music is licensed under the Attribution - Share Alike - Creative Commons license.
More from mb20music
More from Sport & Outdoors
You must be logged in to post a comment.