Configurable Terminal Block
by BrianM, published
Configurable terminal blockwith a lot of parameters.
Three type available, Enclosed nuts as ber original design, Slotted so nuts can be inserted after the print, and bolted so bolts can be inserted from below.
Most parameters self explainatory.
Three type available,
Enclosed nuts as per the original design,
Slotted so nuts can be inserted after the print, and
Bolted so bolts can be inserted from below.
If you are using Enclosed the print must be paused 2 mm below the Terminal Height to insert the nuts.
Liked ByView All
Give a Shout Out
Configurable Terminal Block by BrianM is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure BrianM would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).