by Tobeca, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A case for your Sanguinololu electronic.
The inside dimensions are 130x80mm, so I think you can also install an Azteeg board.
It's spacy but you can arrange the wires in the box to have a clean outpout.
It's designed for two 40mm fans, installed inside.
Print the two files to have the case and the top.
The holes are made to attach the board with screws. In my case I also use the holes to attach both the box and the board on the wood plate.
Printed with 0.25mm layer height.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Sanguinololu Case by Tobeca is licensed under the GNU - GPL license.
What does this mean?
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Tobeca a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Tobeca would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).