Camera slide DIY
by Cyrus3D, published
easy print camera slide for less than 10usd
Print side.stl twice,
print the slide.stl once.
you need 4x steel rods, and I used 2x LM8UU, you can try 4 but mine works better with 2.
25% infill is enough, altough more won't hurt. support is needed for the slide and tripod holder
depending on your tripod mode, you can also print the under bit to put it on the tripod.
I don't like to upload my files on thingiverse as I cannot be bothered to check the terms and conditions of it every month when they feel like changing it. I've just uploaded the tripod bit so i can publish this. so if you want to download all the files please download it from;
for a sample video:
Liked ByView All
Give a Shout Out
Camera slide DIY by Cyrus3D is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
We're sure Cyrus3D would love to see what you've printed. Please document your print and share a Make with the community.