Printable Robot Arm
by 4ndreas, published
This is my first try to build a printable robot arm.
I was inspired by the demo of zortrax, but it's my own design.
It is not tested yet, I'm still printing.
It should fit together but.
There are 8 608zz ball bearing required to mount the arms.
2x M8x60mm and 2x M8x65mm screws and 4 Nuts (best case self locking)
The main motors are Nema17, for the forearm I plan to use a Nema11 with a planetary gear.
The screws to mout the parts together are M4
REMEMBER THIS is untested! The forearm and gripper are also not finished yet.
first test of the basis with the first joint:
I updated some files... most should fit now, but still a work in progress.
all parts are printed:
The second part:
I started a hackaday project:
You can find a overview on my blog:
Liked ByView All
Give a Shout Out
Printable Robot Arm by 4ndreas is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
We're sure 4ndreas would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).