Loading
Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!

Stator generator

by r0gueSch0lar, published

Stator generator by r0gueSch0lar Mar 10, 2013

Description

An openscad script that can generate a stator with various dimensions and any number of poles

Recent Comments

view all
Thanks, that solved it )
please make sure you read through the description above
I dont know how familiar you are with openscad but it sounds like you havent called the module. there should be a line that starts with //stator followed by numbers in brackets. delete the forward slashes and you should see a stator generated

More from DIY

view more

Liked By

view all

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

use the include statement to include the stat gen 0.3.scad file. The statement stator (); takes seven parameters. for example, stator (12, 10, 15, 20, 1.2, 1.5, 200); will generate a stator with 12 poles, with a height of 10 units, a collar with an inner diameter of 15 and outer diameter of 20, an outer diameter to pole length ratio of 1.2, a pole width ratio of 1.5 and a resolution of 200.

Thanks, that solved it )
please make sure you read through the description above
I dont know how familiar you are with openscad but it sounds like you havent called the module. there should be a line that starts with //stator followed by numbers in brackets. delete the forward slashes and you should see a stator generated
WARNING: No top level geometry to render ..
Top