clamp for CNC
by GMFerrari, published
The terminal has proven useful and versatile.
I hope I will be employed by other users
Recent Commentsview all
The fitting on the bottom part of the clamp is basically a metal dowel pin with a threaded hole running through it. The part you can see is a flathead screw so you can rotate the fitting so the bolt will thread into it. HTH
forgive my translation from Italian.
For connection to the surface of the CNC I used a nut and bolt 8 mm. With the lathe I rounded faces of the bolt.
For elevation of the clamp I used a dice that is typically used by carpenters for the union of head between two panels.
Liked Byview all
Give a Shout Out
for the base, use nut ebullone from 8 rounded facets.
I used to tie a dice sold to combine wood paneling.
You must be logged in to post a comment.