Cable Holder for Panasonic Monitor
by countspatula, published
I finally got a sweet Panasonic 1760 production monitor for my workbench so I made a cable holder to mount to the side. It's designed for BNC cables but will work with others as you can see. I've uploaded a left and right side version and they should also work on the 1710 monitor (and probably others).
The red version shown was printed at Shapeways, check it out if interested: http://shpws.me/nRYR
This will work with or without a protective cover installed and you will need an M4 screw 8-10mm long. I would recommend using threadlocker as well.
Print with 1-2 shells and at least 20% fill.