PhotoUpLink.com 3d printed picture frame 1
by mmorrisdev, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Printable FDM photo frame for wallet size 3" x 2" prints. This frame size fits comfortably within the build platform size of most home 3d printers. With separate desk stands for landscape and portrait photo hosting.
The frame prints with rear holes for wall hanging in landscape or portrait mode. The hole size fits the standard 17 gauge 1 inch nail or similar size, or a small picture hook.
Frame dimensions: 96mm x 77mm x 5.4mm + 2mm Z extruded text
Stand (portrait mode) dimensions: 88mm x 50mm x 5mm
Stand (landscape mode) dimensions: 106mm x 50mm x 5mm
PhotoUpLink for iPhone provides stable, bulk photo uploading to FTP, Facebook, Tumblr and more. PhotoUpLink is also available for iPhoto, Aperture, and Windows: http://www.photouplink.com
The frame will take about an hour to print, each stand about 30 minutes at 50 - 70% fill. A higher fill percentage makes a sturdy frame with a good base weight. The stand slot is designed to be a tight fit, you may need to trim and manually finish the print. Wallet size photo prints are easily home printed or ordered online, Amazon has a great overview of options for this task: http://uplink.to/7ei
The slot can be cleared of any overhangs by inserting a corner of the frame and sliding it across. The frame inserts at an optimal desktop viewing angle. If you want to wall hang the frame use a small nail or hook to fit the rear mounting hole on top side for the orientation.
Wallet size photo prints are usually delivered as a set of four on a 4" x 6" sheet with no white border separating the photos. After you cut the sheets yourself, each of the four wallet-sized prints will be 2"x3". The frame is printed with overhangs on each side, horizontally bend the photo print slightly and release into the the frame. You may need to trim the photo to fit.
More photos of the frame and stand on Flickr: http://uplink.to/7ej
Frame files with no logo now available on Cubify: http://uplink.to/7fh
Also available in metal and other materials on Shapeways: http://uplink.to/7fm
Developed using a Printrbot Jr, Pronterface Mac, Sketchup on Mountain Lion and cloud.netfabb.com
PhotoUpLink.com 3d printed picture frame 1 by mmorrisdev is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is not allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving mmorrisdev a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure mmorrisdev would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).