Loading

Song of Storms-Alternate

by atartanian, published

Song of Storms-Alternate by atartanian Mar 14, 2013

Description

This one didn't work, go here for a working version: http://www.thingiverse.com/thing:62353

Recent Comments

view all
I found that this one doesn't print well, so i'm removing the files from it. Please go here for a working version: thingiverse.com/thing:62353
I used your values on everything but the material density and flexibility because I was printing with ABS not PLA. Didn't come out great :( I think I need to fool around with it.
The note bars on this one were too short and snapped off when i tried playing the music. I'm going to redesign a bit and post up another one and probably remove the previous two attempts. Feel free to copy the input values for the notes from mine to play with it yourself.

More from Mechanical Toys

view more

Makes

Liked By

view all

Tags

License

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

Using the following options:

pulleySnapL = 1.2 gammaTooth = 1.875 teethHolderH = 5 teethHolderW = 5 axisSlack = 0.3 midBigTeeth = 20 gear_hold_R = 4 GENERATE_PULLEY = 1 midGearAngle = -5 wall = 2 GENERATE_MID_GEAR = 1 MusicCylinderNamePosition = 0 GENERATE_CASE = 1 crankAxisCutAwayH = 4 diametral_pitch = 0.6 gear_gap = 1 pulleySlack = 0.4 pulleyH = 10 crankTeeth = 8 midSmallTeeth = 8 snapAxisSlack = 0.35 crankDirection = 0 pinD = 1.5 pinH = 3 pins = XoooooooXoooooooooXoooooooooooooooooooooooXoooooooXoooooooooXooooooooooooooooooooooooooooXoooooooooooooooooooooXoooooXoooooooXoooooXooooXoooooXoooooooooooooooooooooooooooooooo epsilonCSG = 0.1 crankExtraH = 4 GENERATE_CRANK_GEAR = 1 midAxisHolderH = 3.3 musicAxisHolderH = 3.4 DEBUG_GEARS = 0 MusicCylinderNameDepth = 0.6 noteAlpha = 5 pinNrY = 25 pinNrX = 7 FOR_PRINT = 1 pteethMinD = 1.5 crankAxisR = 3 gear_tolerance = 0.1 ro_PLA = 924 crankLength = 18 GENERATE_MUSIC_CYLINDER = 1 crankAxisHolderH = 1.55 MusicCylinderName = Storms $fn = 32 E_PLA = 8240000 musicCylinderTeeth = 20 gearH = 3 baseFrequC0 = 16.3516 teethNotes = E 2G 2B 2D 3E 3F#3G 3 gear_min_gap = 0.1 MusicCylinderNameFontSize = 8 crankSlack = 0.2 crankGearAngle = 15 GENERATE_CRANK = 1 MusicCylinderNameFont = write/orbitron.dxf

I found that this one doesn't print well, so i'm removing the files from it. Please go here for a working version: thingiverse.com/thing:62353
Song of Storms
The note bars on this one were too short and snapped off when i tried playing the music. I'm going to redesign a bit and post up another one and probably remove the previous two attempts. Feel free to copy the input values for the notes from mine to play with it yourself.
I used your values on everything but the material density and flexibility because I was printing with ABS not PLA. Didn't come out great :( I think I need to fool around with it.
Which one should I print tomorrow? This one or your other one?
Top