Palm Beach LED business card
by Kabong, published
This item was designed to be a giveaway at the Palm Beach LED launch celebration. It has has a LED and battery installed which lights up the Palm Tree and the rear panel.
Download and print the STLs. To print in multiple colors as in the example pictures, just pause the print at the appropriate point and change the filament to the new color.
After each part has been printed, insert a LED and 3V battery. Suggested LED and battery parts are:
LED - RGB color-changing LED (cat # LED-158): http://www.allelectronics.com/make-a-store/item/LED-158/RGB-COLOR-CHANGING-LED/1.html
Battery - 3V CR2032: http://www.digikey.com/product-detail/en/CR2032/P189-ND/31939
Liked ByView All
Give a Shout Out
Palm Beach LED business card by Kabong is licensed under the Creative Commons - Attribution - Share Alike license.
So what's this mean?
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure Kabong would love to see what you've printed - take a photo and share it on Thingiverse as a Make.