by Misguided, published
I needed a place to hang my headphones so I went and printed one.
This attaches to an Ikea Lack shelf (which is 50mm thick). The ABS will bend a little under the weight from the headphones. Or at least this one did (printed with 2 walls and 0.3 infill).
Version 4 has the bracket bend inwards slightly. This should reduce some of the sagging of the bracket under load.
I'd recommend using a little bit of double-sided tape (or any temporary adhesive that won't damage the shelf) to attach the hook to the shelf.
Liked ByView All
Give a Shout Out
Headphone Hook by Misguided is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure Misguided would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).