Argon Tank Bracket
by BenJackson, published
Use This Project
Give a Shout Out
My Lincoln SP-175+ gave up its own cart to another welder so I tried putting it on a Harbor Freight MIG cart ( http://www.harborfreight.com/welding-cart-90305.html ). Due to the sloped top shelf and the centrally located gas inlet I couldn't get the welder where I wanted without running into the tank (80cf). There's plenty of room on the tank tray so I moved it back about 3" with this bracket. The 80cf tank is 7" diameter (same as 40 and 125 and fits what I thought was a 150).
I'm thinking of modifying the design to remove the spacer so I can use it on another cart and possibly against a wall for storage.
Print. It's about 200x115mm, so the 250mm Y on the MakerGear M2 was very handy.
Attach with 1/4" or similar nuts and bolts.
Secure tank with the integrated chain slots.
Argon Tank Bracket by BenJackson is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving BenJackson a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure BenJackson would love to see what you've printed. Please document your print and share a Make with the community.