ABHA Torus 18X36 Printable
by Vortex87, published
This is an experimental magnetic coil to test the theories of Vortex Based Math. The original file was almost impossible to print given the extreme overhangs, so I created two halves. This way there will be no overhangs, special thanks to Chris Cecil for the tip!
I'm still experimenting with the print settings, I will update my progress later. The final construction will be when the two halves are glued together. Then take conductive metallic paint to fill in the individual nested vorticies. Most experimental electromagnetic coils vary the number of windings, angle, etc. This prototype will have a varying conductive path to hopefully increase the electromagnetic implosion effect.
Liked ByView All
Give a Shout Out
ABHA Torus 18X36 Printable by Vortex87 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure Vortex87 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).